1965-1982 Corvette New Delco Caliper and Seal Kits
New Calipers with Lip Seals: Get completely new calipers that feature: New Stainless Steel Sleeves; New Pistons, Seals, Springs, Dust Covers, Stainless Steel Bleeder Screws and Plugs. Individually pressure tested. Covered by a LIMITED LIFETIME WARRANTY*. No Core Charge.
New Calipers with O-Rings: Brand new brakes with modern performance feature: New Stainless Steel Sleeves; New O-Ring Pistons, Seals, Springs, Dust Covers, Stainless Steel Bleeder Screws and Plugs. Individually pressure tested. Covered by a LIMITED LIFETIME WARRANTY*. No Core Charge.
Note: If converting from DOT 3 or DOT 4 to Silicone (DOT 5), or from Silicone to DOT 3 or DOT 4, when you replace your calipers, you must purge the entire system (master cylinder, brake lines & hoses) because the fluid will gel.
- Caliper Special 1 Includes:
- 4 Calipers
- 8 Disc Brake Pads
- 4 Caliper Pad Pins
- 4-piece Rubber Brake Hose Set
- 1 Pair of Rear Caliper Brake Lines
- 1 Piston Retaining Tool
- 1 Quart of Brake Fluid
- Caliper Special 2 (pictured above) Includes all of Special 1 plus:
- 1 Anti-Corrosive Stainless Steel Park Brake Kit
- 4-piece Park Brake Shoe Set
* LIMITED LIFETIME WARRANTY
Caliper Sleeves are warranted to the original purchaser for as long as they own the vehicle, so long as the brake system is properly maintained (correctly replacing brake fluid upon initial installation and each subsequent brake fluid change, which should be done once every two years). New rubber hoses should be installed during the initial installation of the calipers and be replaced every 5 years, as internal hose deterioration can contaminate the brake fluid. All other parts and workmanship of these calipers are warrantied for 90 days from the date of purchase under normal use.