1965-1982 Corvette Classic Restoration Calipers
For those who want 100% original, our Restoration Calipers feature New Stainless
Steel Sleeves, New Pistons, Lip Seals, Springs, Dust Covers, Stainless Steel Bleeder Screws
and Plugs, Long Lasting Epoxy Paint, and they’re Individually Pressure Tested.
Covered by a LIMITED LIFETIME WARRANTY*. Core Charges Apply+.
Our calipers are completely compatible with DOT 3, DOT 4 or DOT 5 brake fluid. The use of silicone brake fluid (DOT 5) does not void the warranty.
Please Note: If converting from DOT 3 or DOT 4 to Silicone (DOT 5), or from Silicone to DOT 3 or DOT 4, when you replace your calipers, you must purge the entire system (master cylinder, brake lines & hoses) because the fluid will gel.
- Caliper Special 1 (43034) Includes:
- 4 Calipers
- 8 Disc Brake Pads
- 4 Caliper Pad Pins
- 4-piece Rubber Brake Hose Set
- 1 Pair of Rear Caliper Brake Lines
- 1 Piston Retaining Tool
- 1 Quart of Brake Fluid
- Caliper Special 2 (43035) Includes all of Special
- 1 Anti-Corrosive Stainless Steel Park Brake Kit
- 4-piece Park Brake Shoe Set
* LIMITED LIFETIME WARRANTY
Caliper Sleeves are warranted to the original purchaser for as long as they own the vehicle, so long as the brake system is properly maintained (correctly replacing brake fluid upon initial installation and each subsequent brake fluid change, which should be done once every two years). New rubber hoses should be installed during the initial installation of the calipers and be replaced every 5 years, as internal hose deterioration can contaminate the brake fluide. All other parts and workmanship of these calipers are warrantied for 90 days from the date of purchase under normal use.
+ Core Charge
$50 per caliper. Returned calipers must be Original Delco Moraine Castings without broken ears or altered bleeders. If calipers have been previously sleeved, the core refund will be reduced to $25 provided it meets the above criteria.